*Safe Operating Procedure of UG Cable Laying.*
Before starting cable laying, the worker must take personal protective equipment later and keep it with safety tools. (Pic-1)
Pic-1
Pic-2
The most important thing to be aware of during this cable laying work. Because most accidents happen only during laying.
All tools should be thoroughly checked before starting cable laying. Those tools should be removed from the site if something looks bad.
Before starting cable laying, the worker must take personal protective equipment later and keep it with safety tools. (Pic-1)
> The most important tool in cable laying is the cable jack. Work should never start without a cable jack. After placing the cable drum on the cable jack, it should be surrounded by Barricade.
> The cable is always open from the top when laying the cable from the cable drum(pic-2). The drum on Jake will rotate anti-clockwise, never clockwise. Otherwise the drum is likely to fall.
>The cable drum will have rotating speed 30 meter per minute.
> Laying from the drum to the cable should always be done on the roller. Laying the cable without the cable roller can cut the cable which is completely unsafe work.
> The distance between the cable rollers will be 2-2.5 meters.
>Only one should be pulled with a winch machine. It only has a certain speed of pull which reduces the chances of an accident.
The speed of Winch machine will be 30 m / min.
> The cable drum should be surrounded by a barricade 1 meter away so that no one can approach it while rotating the drum. The drum is likely to fall while rotating. This can lead to accidents.
> During cable laying, the cable drum should be kept inside, not outside the trench.
Equipment required for cable laying
1- Cables Jack, 2- Roller, 3- Winch Machine, 4- Chiniese lock/Pulling Lock, 5- Swiegel. 6 Rope.
No comments:
Post a Comment